China best Flush Butt Welded Stud Link Anchor Chain roller chain size chart

Product Description

China largest stud link anchor chain factory, manufacturer,supplier,stockist,for sales .abs,lr,bv,dnv,ccs,kr,nk.all IACS,flush butt welded stud link anchor chain,super long warranty
Product Description

1. Stud Link Anchor Chain Cable Introduction:
Stud Link Anchor Chain is widely used on Floating Equipment, Ships, Oil Rigs and Mooring Buoys.
Aohai supply wide range of sizes and grades:
Grade U2 / U3 from 12.5mm to 162mm; Grade ORQ / R3 /R3S / R4 from 58mm to 162mm
Can be supplied with LR, ABS, DNV-GL, NV, NK, KR, TINA, CCS, RS certificate
Our chain can meet requirement of ISO1704, GB/T 549, JIS F3303, Gost 228, IACS, OCIMF, API and other international regulations.

 

Flash Butt Welding Anchor Chain Cables.

Type

Studlink Chain,Studless Chain

Accessories

Kenter Shackle,End Shackle,Swivel Group,Type A&B Swivel Anchor,Buoy Shackle,Pear Shackle,Triangle Plate,Forlock Shackle

Size

 From 22mm to 162mm

Standard

GB/T 549-2017, 

Certification

ISO9001, LR, ABS, DNV, GL, BV, NK, KR, CCS, RINA, CCS, RMRS…

Material

 CM490,CM690,Special Quality Steel

Surface

Black Painted or Galvanised

Our Company:
China Shipping Anchor Chain(ZheJiang ) Co., Ltd is a manufacturer approved by LR, ABS, BV, NK, KR, DNV-GL, CCS, RINA, RMRS……
Our main workshop is in ZheJiang , with sales office HangZhou and oversea stock warehouse in Singapore.
Our factory is also ISO9001, ISO14001 approval and API approval.
Our main products:
Anchor chain and accessories (Stud Link Anchor Chain, Studless Anchor Chain, all types of shackles and connectors)
Mooring chain and accessories (Stud Link Mooring Chain, Studless Mooring Chain, Grade ORQ, R3, R3S, R4 and R5)
Deck outfitting (Chain Stopper, Chock, Bollard and Fairlead)
Marine anchors (Oridinary Anchor such as Hall, Spek and Stockless Anchor, High Holding Power Anchor such as AC-14, Danforth and Pool Achor)
Offshore and agricultural anchors (Flipper Delta, Stevpris MK5, MK6 and Stevshark)
Offshore mooring buoy (Steel Structured, Foam Filled and Navigation Buoys)
Container lashing products (Container corner, Socket, Foundation, Twistlock, D ring, Lashing rod and Lashing chain)
Fenders (Yokohama Type Pneumatic Fender, CZPT Rubber Fender for Quay)
Products with high quality and service of professionality is what we pursue.
Please contact us if you have any queries, we will do our best to meet your requirements.
How to contact us:

1 You can click “contact now” on the top this webpage and email us.
2 You can call and talk to our sales manager.
3 You can see our email address on the bottom of this webpage.

Due to limited space here, some photo is vague, you can contact us for clearer ones.
2. Product Dimensions:

3. Technical Data
Proof Load and Breaking Load of Stud Link Anchor Chain:

Nominal Diameter (mm) Proof Test Load (kN) Breaking Test Load (kN)
Grade 2 Grade 3 Grade 2 Grade 3
17.5 127 179 179 256
19 150 211 211 301
20.5 175 244 244 349
22 200 280 280 401
24 237 332 332 476
26 278 389 389 556
28 321 449 449 642
30 368 514 514 735
32 417 583 583 833
34 468 655 655 937
36 523 732 732 1050
38 581 812 812 1160
40 640 896 896 1280
42 703 981 981 1400
44 769 1080 1080 1540
46 837 1170 1170 1680
48 908 1270 1270 1810
50 981 1370 1370 1960
52 1060 1480 1480 2110
54 1140 1590 1590 2270
56 1220 1710 1710 2430
58 1290 1810 1810 2600
60 1380 1940 1940 2770
62 1470 2060 2060 2940
64 1560 2190 2190 3130
66 1660 2310 2312 3300
68 1750 2450 2450 3500
70 1840 2580 2580 3690
73 1990 2790 2790 3990
76 2150 3571 3571 4300
78 2260 3160 3160 4500
81 2410 3380 3380 4820
84 2580 3610 3610 5160
87 2750 3850 3850 5500
90 2920 4090 4090 5840
92 3040 4260 4260 6080
95 3230 4510 4510 6440
97 3340 4680 4680 6690
100 3530 4940 4940 7060
102 3660 5120 5120 7320
105 3850 5390 5390 7700
107 3980 5570 5570 7960
111 4250 5940 5940 8480
114 4440 6230 6230 8890
117 4650 6510 6510 9300
120 4850 6810 6810 9720
122 5000 7000 7000 9990
124 5140 7200 7200 15710
127 5350 7490 7490 1571

4. Product Photos:

China largest stud link anchor chain factory, manufacturer,supplier,stockist,for sales .abs,lr,bv,dnv,ccs,kr,nk.all IACS,flush butt welded stud link anchor chain,super long warranty

5. Production And Inspection Procedure:

6. Our Advantage:
Manufacturing Advantage:
1.We have more than 20 years experience in anchor chain production.

2.We keep some in stock can delivery in 1~5 days to meet urgent requirement.

3.Our factory is ISO9001 approval, OSHMS18001 approval, ISO14001 approval, API approval and type approval by all IACS members.

4.Advantage manufacturing facilities:
Advanced program-controlled chain production line; Automatic heat treatment machine; Automatic shot blasting machine.

5.Quality Control:Manufacturing process quality control from raw material to final product.

Whole set drawing approved by all IACS members; Material Fatigue Test on request; Stress Analysis on request; Stress actual test on quest.

Magnetic power testing, ultrasonic testing, and fluorescent penetrant inspection.

Load test machine up to 4000Ton.
 

Thirty Party Certificate:
Lloyd’s Rigister of Shipping (LR)
American Bureau of Shipping (ABS)
Det Norske Veritas (DNV)
Germanischer Lloyd (GL)
Bureau Veritas (BV)
Korean Register of Shipping (KR)
Nippon Kaiji Kyokai (NK)
Registro Ltaliano Navale Group (RINA)
China Classification Society (CCS)
Russian Maritime Register of Shipping (RMRS)
Indian Register of Shipping (IRS)
Croatian Register of Shipping (CSR)
Due to limited space here, some photo is vague, you can contact us for clearer ones.

8. Exhibition:

8.Related products:

China largest stud link anchor chain factory, manufacturer,supplier,stockist,for sales .abs,lr,bv,dnv,ccs,kr,nk.all IACS,flush butt welded stud link anchor chain,super long warranty

Warranty: 12 Months
Transport Package: in Nude
Customization:
Available

|

Customized Request

chain

Different types of drive chains

There are many different types of drive chains. You should be able to differentiate between roller chains, forged rivetless chains, double chains, flat-top chains, and helical chains by the terms used. This article will provide information on the different types of chains. Then, you can choose the right one according to your needs. If you haven’t purchased a chain yet, read this article to get started. It will also provide information on the pros and cons of each type.

roller chain

There are several differences between drive chains and roller chains, but in essence, the two are functionally similar. The choice of which type to use depends largely on the type of environment it will be exposed to. While roller chains are suitable for clean indoor environments, they are not very forgiving when it comes to rubbing against the rails. Following are the main differences between a drive chain and a roller chain. Using the correct drive chain is essential for a smooth and efficient running machine.
Roller chain drive chains come in many different weights and tensile strengths. For light-duty applications, use a smaller pitch chain. For heavy-duty applications, use larger pitch chains. The design simplicity of these chains makes them ideal for a variety of applications. While they are great for a variety of applications, the durability of these chains makes them ideal for a variety of applications. Some of the main uses of roller chain drive chains are listed below.
When replacing the drive chain, be sure to follow the safety guidelines. The most important thing to remember is not to place the chain on a dirty floor as it may cause stretch or damage. After removing the chain from the sprocket, apply the measured load specified by ANSI to it. If the load exceeds this value, the chain may bend. A suitable load for measuring a drive chain should be at least six links.
While roller chains are usually made of carbon steel, some are made of stainless steel and are used in food processing machinery. In these environments, the chain may be made of stainless steel for lubrication. Brass and nylon are also sometimes used to meet these requirements. Regardless of the application, however, choosing the right drive chain is critical to the success of a roller chain machine. It is important to maintain the proper balance between the roller chain and the machine.
To properly use a roller chain, first determine the size of the sprocket used for the drive. The size of the chain should be smaller than the smallest sprocket to prevent tooth interference and provide adequate winding on the smaller sprocket. A good practice is to choose a drive chain with a center distance of 30 to 50 times the chain pitch. The longest possible center-to-center distance is approximately 80 times the chain pitch but is not recommended for high-speed applications.

Drop forged rivetless chain

Drop-forged rivetless drive chains are made of drop-forged steel components. Their proportions are suitable for strength and lightweight. Forged rivetless chains are generally divided into three types. Each of these types has its own set of important specifications. Key topics include minimum ultimate tensile strength, chain length tolerances, and link dimensions. Read on to learn more about each type and its uses.
One of the main features of forged rivetless chains is that, despite their relatively low price, they are designed to be very durable. The quality of a forged chain depends on the structure and design of the chain. The manufacturer of this type of drive chain is CZPT, which has a large stock of these chains. The chain is proof tested after assembly and comes with a two-year parts replacement warranty.
Forged rivetless chains are available in a variety of pitch sizes and strength grades. They are made of cast manganese or alloy steel and have an average strength of 24,000 to 300,000 pounds. These chains are suitable for automotive, conveyor, and material handling as well as meat packaging, sugar processing, and steel mill applications. They are also widely used in conveying systems. To ensure quality and performance, manufacturers offer a variety of forged chains.
CZPT offers forged CZPT drive chains for fatigue-free operation. The chain includes a solid one-piece forged drive pawl for optimum durability. Chains are available in Figure 8 and in D-shape styles. For more information, please contact CZPT directly. Custom Drop-Forged rivetless drive chains can be ordered. Manufacturers also offer custom chains for specific application needs.

double chain

Duplex drive chains have two sets of rollers instead of one, producing twice the power. Double chain roller chains have pins and roller bearings, while triple chain chains have an extra row of plates to accommodate the three sprockets. They are usually interchangeable with each other. They are available for US, UK, and ISO standards. They are made of carbon steel, stainless steel, and nickel or nickel-plated.
chain

flat top chain

Flat-top drive chains are ideal for curved or straight tracks and come in many different types and thicknesses. These chains are highly resistant to wear and are usually made of steel, stainless steel, or plastic. CZPT manufactures special brands of flat-top chains with high wear resistance and excellent noise reduction. In addition to being versatile, flat-top chains can be used in a variety of industrial applications.
There are two main types of CZPT chains: solid top or raised rib. One piece is formed from a single unit link and the other has roller base links for added strength. The two-piece chain combines flat tabletop links and a roller bottom chain for added strength. These chains are available in widths up to 20 feet and are available in a variety of widths. These chains are available in stainless steel, cast iron, or plastic.
The hinge pin is another important part of the flat top chain system. Support chain plate to ensure smooth conveying. The hinges are available in single hinge pin and double hinge pin styles. Standard hinge pins are designed for straight, narrow-width chainplates; double hinge pins are designed for longer, heavier products. The hinge pins also come in many different materials, including aluminum and galvanized steel. This allows for customization based on machine design, operating conditions, and drive method.
Whether your flat-top chain conveyor system is large or small, a high-quality flat-top chain will get the job done. With their low maintenance and low maintenance design, these chains are easy to clean and maintain. They can accommodate workpiece pallets of various sizes, and their flexibility makes them ideal for many different applications. They can also be highly customized for various industries. So if you need an industry-specific conveyor, then a flat-top drive chain is the way to go.

China best Flush Butt Welded Stud Link Anchor Chain   roller chain size chartChina best Flush Butt Welded Stud Link Anchor Chain   roller chain size chart
editor by CX 2023-05-24