Tag Archives: x458 conveyor chain

China wholesaler Drop Forged Chain X458 Overhead Conveyor Chain

Product Description

Detailed Photos

 

 

Product Description

 The shape is simple, UH-7075-S is the basic style of the five-ton cross suspension chain, suitable for general overhead conveyor lines.
The traditional old five-ton chain (UH-5075) is a more widely used and more used suspension chain. Because this chain has a small pitch, it can run smaller curved rails, can hang more objects, and has many chain styles and cranes. With complete accessories and easy installation, it has always been the choice of suspension conveyors.

The 5-ton cross-shaped chain UH-7075-S is based on the design and transformation of the traditional 5-ton suspension chain UH-5075-S. It is not only a new appearance change, but also an important improvement in mechanical performance.

 

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 
 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

conveyor

How does a conveyor chain impact energy efficiency in a system?

A conveyor chain plays a significant role in the energy efficiency of a conveyor system. Here are the ways in which it impacts energy efficiency:

1. Reduced Power Consumption:

– A well-designed conveyor chain with low friction characteristics can minimize power consumption. By reducing the frictional resistance between the chain and the conveyor components, less energy is required to move the chain and transport the materials along the conveyor system.

2. Efficient Power Transmission:

– The design and construction of a conveyor chain contribute to efficient power transmission. Chains with optimized pitch, roller diameter, and sprocket tooth profile ensure smooth and effective power transfer, minimizing energy losses during operation.

3. Proper Chain Tensioning:

– Maintaining proper chain tension is crucial for energy efficiency. An adequately tensioned chain ensures optimal contact between the chain and the sprockets, minimizing slippage and power loss. Regular inspections and adjustments of chain tension help maximize energy efficiency.

4. Alignment and Tracking:

– Proper alignment and tracking of the conveyor chain are essential for energy efficiency. Misaligned or poorly tracked chains can cause increased friction, leading to higher energy consumption. Regular monitoring and adjustment of the chain’s alignment ensure smooth and efficient operation.

5. Regular Maintenance:

– Performing routine maintenance on the conveyor chain, including lubrication, cleaning, and inspection, helps maintain optimal performance and energy efficiency. Adequate lubrication reduces friction and wear, minimizing power losses and extending the chain’s lifespan.

6. System Design Optimization:

– Considering energy efficiency during the design phase of a conveyor system can significantly impact its overall efficiency. Proper selection of conveyor chain components, such as low-friction materials and efficient drive systems, can help minimize energy consumption and improve the system’s energy efficiency.

By employing these practices and utilizing energy-efficient conveyor chain technologies, businesses can reduce energy costs, minimize environmental impact, and enhance the overall sustainability of their operations.

conveyor

What are the safety measures for working with heavy-duty conveyor chains?

Working with heavy-duty conveyor chains requires strict adherence to safety measures to protect the workers and maintain a safe working environment. Here are some important safety measures to consider:

1. Proper Training: All personnel involved in working with conveyor chains should receive comprehensive training on the safe operation and maintenance of the equipment. This includes understanding the potential hazards, safety procedures, and proper use of personal protective equipment (PPE).

2. Equipment Inspection: Regular inspection of the conveyor chain and associated components is crucial to identify any signs of wear, damage, or malfunction. This includes checking for loose fasteners, worn sprockets, misalignment, and any other potential hazards. Any issues should be addressed promptly to prevent accidents.

3. Lockout/Tagout: Before performing any maintenance or repair tasks on the conveyor chain, proper lockout/tagout procedures must be followed. This ensures that the equipment is de-energized and isolated from any power source to prevent accidental startup or movement.

4. Personal Protective Equipment (PPE): Workers should wear appropriate PPE, including safety glasses, gloves, steel-toed boots, and hearing protection. The specific PPE requirements may vary depending on the nature of the work and the potential hazards involved.

5. Safe Work Practices: Workers should follow safe work practices, such as avoiding loose clothing or jewelry that can get caught in the chain, keeping hands and clothing clear of moving parts, and using proper lifting techniques when handling heavy loads.

6. Emergency Stop Systems: Conveyor systems should be equipped with emergency stop buttons or pull cords that allow workers to quickly stop the chain in case of an emergency or hazardous situation.

7. Regular Maintenance: Scheduled maintenance and lubrication of the conveyor chain should be performed according to the manufacturer’s recommendations. This helps to ensure optimal performance and minimize the risk of unexpected failures.

8. Clear Warning Signs and Labels: Proper signage, warning labels, and safety instructions should be clearly displayed near the conveyor chain system to remind workers of potential hazards and safe operating procedures.

9. Regular Safety Training and Communication: Ongoing safety training and communication among the workforce are vital to reinforce safe practices and raise awareness of any changes or updates to safety protocols.

By implementing these safety measures and fostering a safety-conscious culture, the risks associated with working with heavy-duty conveyor chains can be minimized, ensuring the well-being of the workers and the efficient operation of the equipment.

conveyor

What are the main components of a conveyor chain?

The main components of a conveyor chain include:

  • Chain Links: Chain links are the individual components that make up the conveyor chain. They are typically made of metal and are connected to form a continuous loop. The design and configuration of the chain links can vary depending on the specific application and load requirements.
  • Pins: Pins are the cylindrical components that hold the chain links together. They are inserted through the end of each chain link to create a solid connection. Pins are usually made of hardened steel to withstand the forces and friction within the conveyor system.
  • Sprockets: Sprockets are toothed wheels that engage with the chain links and provide the driving force to move the conveyor chain. They are typically made of durable materials such as steel or plastic and are designed to match the pitch and profile of the conveyor chain. Sprockets come in various sizes and configurations depending on the desired speed and load capacity of the conveyor system.
  • Guide Rails: Guide rails are stationary components installed along the conveyor path to guide and support the movement of the conveyor chain. They help maintain proper alignment and prevent the chain from derailing or deviating from its intended path.
  • Tensioners: Tensioners are devices used to maintain the proper tension in the conveyor chain. They ensure that the chain remains taut and engaged with the sprockets, preventing slack or excessive sagging. Tensioners can be adjusted to accommodate variations in chain length and to compensate for wear over time.
  • Attachments and Accessories: Depending on the specific application, conveyor chains may include various attachments and accessories. These can include cleats, flights, buckets, or other devices that aid in the movement and handling of specific types of materials. These attachments are typically secured to the chain links at specific intervals or locations.

The combination of these components creates a robust and reliable conveyor chain system capable of efficiently transporting materials in a wide range of industrial applications.

China wholesaler Drop Forged Chain X458 Overhead Conveyor Chain  China wholesaler Drop Forged Chain X458 Overhead Conveyor Chain
editor by CX 2024-04-12

China Standard Rivetless Drop Forged Conveyor Link X458 Chain for Painting Line System

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: X348 X458 X658 X678 X698 F100 F160, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Product Show
 

Technical Data
 

Model Pitch Dimension Lateral Corner Standard Measured Length (mm) Measured Quantity Tensile Strength (KN) Weight (Kg/m)
A F G J K S
80H 80 73 42 18.4 20 34.5 19.5 7 3032/3058 38 250 7.8
X348 76.6 46 27 12.7 12.7 20.6 13.5 9 3050.5/3095.2 40 110 3.2
X458 102.4 57 37 16 16 26.5 17.5 9 3063.1/3090.2 30 210 5.2
468H 102.4 84.1 47.8 18 29.5 42.9 22.2 9 3063.1/3090.2 30 318 11.5
X658 153.2 55.6 35 16 16 57.2 17.5 7 3055.1/3082.8 20 210 4
X678 153.2 77 50.8 22.2 21 34.2 25 7 3055.1/3082.8 20 320 9.5
678 153.2 77 50.8 22.2 21 34.2 25 7 3055.1/3082.8 20 320 9.5
698 153.2 95.25 64 28 25.4 41.3 32 5 3055.1/3082.8 20 515 17
998 229.4 95.25 67.5 28 25.4 41.3 32 5 3205/3232.4 13 515 14.8
9118 229.4 123.8 76.2 35 33.5 52 38.1 5 3205/3232.4 13 832 24.2
S348 76.6 38.9 28.6 12.7 12.7 20.6 13.5 9 3050.5/3095.2 40 110 3.2
S458 102.4 52.1 35 16 16 26.5 17.5 9 3063.1/3090.2 30 210 5.2
S678 153.2 69.8 50.8 22.2 21 34.2 25 7 3055.1/3082.8 20 320 9.5
S698 153.2 73 68.3 28 25.4 41.3 32 5 3055.1/3082.8 20 515 17
S9118 229.4 98.4 77.8 35 33.5 52 38.1 5 3205/3232.4 13 832 24.2
F100 100 57 37 16 16 26.5 17.5 9 2991.3/3018.3 30 210 5.2
F160 160 78 54 24 20.5 36 28 7 3190.7/3219.5 20 318 10.3

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

conveyor

What are the considerations for selecting a corrosion-resistant conveyor chain?

When selecting a corrosion-resistant conveyor chain, several considerations should be taken into account to ensure optimal performance and longevity in corrosive environments. Here are the key factors to consider:

– Material Selection:

Choose a conveyor chain material that is resistant to the specific corrosive agents present in the environment. Stainless steel, plastic, and special coatings such as zinc or nickel plating are commonly used for their corrosion resistance properties.

– Corrosion Resistance Ratings:

Review the corrosion resistance ratings of different chain materials and coatings. Look for industry standards such as ASTM or ISO ratings that indicate the material’s resistance to specific corrosive substances or environmental conditions.

– Environmental Factors:

Consider the specific environmental factors that contribute to corrosion, such as humidity, temperature, presence of chemicals or solvents, and exposure to saltwater or acids. Evaluate how these factors may impact the chain’s corrosion resistance requirements.

– Coating or Surface Treatment:

If using a metal chain, consider applying additional coatings or surface treatments to enhance its corrosion resistance. Options may include electroplating, powder coating, or using specialized anti-corrosion coatings.

– Compatibility with Cleaning Methods:

Ensure that the selected chain material is compatible with the cleaning methods and chemicals used in the application. Some corrosive-resistant materials may require specific cleaning procedures to maintain their performance and longevity.

– Operational Considerations:

Take into account the load capacity, speed, and operational requirements of the conveyor system. Ensure that the corrosion-resistant chain can withstand the mechanical stresses and operational demands without compromising its corrosion resistance properties.

– Cost-Effectiveness:

Weigh the initial cost and long-term benefits of using a corrosion-resistant conveyor chain. While corrosion-resistant materials may have a higher upfront cost, they can significantly reduce maintenance, replacement, and downtime costs associated with corrosion-related failures.

By considering these factors, you can select a corrosion-resistant conveyor chain that is well-suited for the specific corrosive environment, ensuring reliable and durable performance in applications such as chemical processing, food production, wastewater treatment, or outdoor environments.

conveyor

What are the different attachment options available for a conveyor chain?

Conveyor chains can be equipped with various types of attachments or accessories to accommodate specific material handling needs. Here are some common attachment options:

1. Cleats or Flights: Cleats or flights are raised sections attached to the conveyor chain to prevent materials from slipping or sliding off the chain. They are commonly used in incline or decline applications or when handling loose or bulk materials.

2. Side Plates or Side Guards: Side plates or side guards are installed along the edges of the conveyor chain to provide containment and prevent materials from spilling or falling off the sides. They are particularly useful when conveying small or irregularly shaped items.

3. Pusher Bars: Pusher bars are extensions mounted on the conveyor chain that can be pneumatically or mechanically actuated to push materials onto a different conveyor line or divert them to a specific location. They are often used for sorting or diverting applications.

4. Hold-Downs or Brackets: Hold-downs or brackets are devices attached to the conveyor chain to secure and stabilize the transported materials. They ensure that the materials remain in a fixed position during the conveying process, especially when encountering vibrations or changes in speed.

5. Guide Rails: Guide rails are installed alongside the conveyor chain to provide guidance and alignment for the materials being conveyed. They help maintain the desired path and prevent lateral movement or misalignment.

6. Magnetic Attachments: Magnetic attachments are used when handling ferrous materials. They allow the conveyor chain to attract and hold magnetic objects, ensuring effective transport and separation.

7. Tooling Plates: Tooling plates are platforms or mounting surfaces attached to the conveyor chain to accommodate specific equipment, such as fixtures, sensors, or robotic arms. They provide a convenient and customizable interface for integrating additional functionalities into the conveyor system.

8. Diverters or Transfer Units: Diverters or transfer units are specialized attachments that enable the seamless transfer of materials from one conveyor line to another, or between different processing stations. They ensure smooth transitions and precise material flow control.

These attachment options offer flexibility and versatility in conveyor chain applications, allowing customization based on the specific requirements of the material being transported or the production process. By selecting the appropriate attachments, conveyor chains can effectively handle a wide range of materials and optimize material flow within a conveyor system.

conveyor

What is the load capacity of a conveyor chain?

The load capacity of a conveyor chain depends on various factors, including the chain design, material, size, and the operating conditions. It is crucial to consider the specific application requirements when determining the load capacity of a conveyor chain. Here are some key factors to consider:

  • Chain Design: Different types of conveyor chains have varying load capacities. The chain design includes factors such as the type of links, their configuration, and the presence of attachments or rollers.
  • Material: The material used to manufacture the conveyor chain significantly affects its load capacity. Common materials include steel, stainless steel, and plastic. Steel chains are generally more robust and have higher load-bearing capabilities.
  • Chain Size: The size of the conveyor chain, including the pitch and width, plays a role in determining its load capacity. Larger chains with wider links tend to have higher load capacities.
  • Operating Conditions: Factors such as the speed of the conveyor, the type and weight of the transported materials, and the environmental conditions (temperature, humidity, etc.) can impact the load capacity of the chain.
  • Manufacturer Specifications: It is essential to consult the manufacturer’s specifications and guidelines for the specific conveyor chain being used. Manufacturers typically provide load capacity charts or tables based on their chain designs.

The load capacity of a conveyor chain is typically specified in terms of its maximum allowable working load or breaking strength. These values are determined through rigorous testing and engineering calculations. To ensure safe and efficient operation, it is important to select a conveyor chain that has a load capacity suitable for the intended application. Exceeding the recommended load capacity can lead to premature wear, chain failure, and potential safety hazards.

China Standard Rivetless Drop Forged Conveyor Link X458 Chain for Painting Line System  China Standard Rivetless Drop Forged Conveyor Link X458 Chain for Painting Line System
editor by CX 2024-03-28

China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 20Cr, 45# steel and so on.
2) Types: X348 X458 X678 XT160, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Assemly→Packing

Product Show
 

Technical Data
 

Model Forging Parameter (mm) Weight (Kg) Single-point Load (Kg) Allowable Load (Kg) Limit Load (Kg)
Type P H A B C D E F G K
X348-1 A 100 64 102 14 40 60 47.8 6 84 1.5 100 1100 1800
X348-2 B 100 64 102 14 40 60 47.8 6 82
X348-3 C 100 64 122 16 40 60 47.8 6 94
X458-1 A 126 79 138 18 54 82 54 9.5 113 1.8 200 1800 3600
X458-2 A 127 80 138 18 56 82 54 9.5 113
X458-3 A 130 83 138 18 54 82 54 9.5 113
X458-4 B 128.6 81 134.5 18 54 81 54 9.5 101.5
Extended Trolley A 150 103 138 18 54 82 54 9.5 113
X678-1 / 136 89 146 18 86 82 54 9.5 114 3.2 600 5000 7700
X678-2 / 134.5 87.5 142 18 86 82 54 9.5 106 2.8 550 4500 7200
XT160-1 / 171 103 180 26 84 120 70 15 140 9.7 750 4000 8000
XT160-2 / 170 102 174 26 86 120 70 15 148 8.8 700 3500 7500
X348-1 Reverse / 83 42 105 / 40 60 / 48 10 / 1.35 100 1100 1800
X348-2 Reverse / 86 45 93 / 40 60 / 48 10 / 1.35 100 6 1800
X458 Reverse / 95 44 120 / 54.5 60 / 54 10 / 2.5 200 1800 3600

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Samples:
US$ 5/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

conveyor

Can a conveyor chain be used in extreme temperature environments?

Yes, conveyor chains can be designed and manufactured to withstand extreme temperature environments. The suitability of a conveyor chain for high or low-temperature applications depends on the material composition and construction of the chain.

1. High-Temperature Environments: For applications involving high temperatures, conveyor chains made of heat-resistant materials such as stainless steel or special alloys are commonly used. These chains can withstand elevated temperatures without significant deformation or loss of strength. They are designed to resist oxidation, corrosion, and thermal expansion, ensuring reliable performance in hot environments.

2. Low-Temperature Environments: Similarly, conveyor chains can also be engineered for low-temperature applications. In cold environments, chains made of materials that remain ductile and strong at low temperatures are utilized. These chains are designed to withstand the effects of cold temperatures without becoming brittle or losing their mechanical properties.

It’s important to consult with conveyor chain manufacturers or experts who specialize in extreme temperature applications to select the most suitable chain material and design. They can provide guidance on factors such as material selection, lubrication, and operational considerations to ensure the conveyor chain performs effectively and reliably in extreme temperature environments.

conveyor

How does a conveyor chain impact material flow in a production line?

A conveyor chain plays a crucial role in facilitating the smooth and efficient flow of materials in a production line. Here are the key ways in which a conveyor chain impacts material flow:

1. Continuous Movement: A conveyor chain enables continuous movement of materials along the production line. By securely holding and transporting the materials, the chain ensures a consistent flow without interruptions or delays.

2. Speed Control: The speed at which the conveyor chain moves can be adjusted to match the desired production rate. This allows for precise control over the material flow, ensuring that it aligns with the downstream processes and avoids bottlenecks or overloading.

3. Orientation and Positioning: Conveyor chains can be designed with specific attachments or fixtures to orient and position materials in a desired manner. This ensures that the materials are presented correctly for processing, assembly, or packaging, optimizing the overall production flow.

4. Sorting and Diverging: In certain applications, conveyor chains can be equipped with mechanisms for sorting or diverging materials based on predetermined criteria. This allows for efficient routing of different products or components to their respective destinations, streamlining the material flow.

5. Accumulation and Buffering: Conveyor chains can incorporate accumulation zones or buffering areas where materials can temporarily pause or accumulate. This feature is useful when downstream processes experience temporary disruptions or when there is a need to balance the flow between different production stages.

6. Integration with Equipment: Conveyor chains can be integrated with other equipment or machines in the production line, such as robotic arms, automated packaging systems, or inspection stations. This seamless integration enables synchronized material handling, optimizing the flow and efficiency of the entire production process.

7. Customization for Specific Needs: Conveyor chains can be customized to meet specific material handling requirements. This includes considerations such as chain width, length, height adjustments, inclines or declines, and specialized attachments or guides. Such customization ensures that the material flow is tailored to the unique needs of the production line.

By providing a reliable and controlled method of transporting materials, a conveyor chain significantly influences the material flow in a production line. It enhances productivity, reduces manual handling, minimizes the risk of errors or damage, and ultimately contributes to the overall efficiency and success of the manufacturing process.

conveyor

What are the common causes of conveyor chain failures?

Conveyor chain failures can occur due to various reasons, and identifying the root cause is crucial for preventing future issues. Here are some common causes of conveyor chain failures:

  • Lack of Lubrication: Insufficient or improper lubrication can lead to increased friction and wear on the chain components, resulting in premature failure.
  • Excessive Load: Overloading the conveyor chain beyond its rated capacity can cause excessive stress and strain, leading to chain elongation, deformation, or link breakage.
  • Misalignment: Improper alignment of the conveyor chain can cause uneven loading and excessive wear on specific areas, leading to chain failure.
  • Environmental Factors: Harsh operating environments, such as high temperatures, corrosive substances, or abrasive materials, can accelerate chain wear and corrosion, leading to failure.
  • Foreign Objects: The presence of foreign objects or debris on the conveyor system can interfere with the movement of the chain, causing jamming, binding, or chain damage.
  • Poor Maintenance: Inadequate maintenance practices, such as irregular inspections, failure to address minor issues promptly, or neglecting to replace worn components, can contribute to chain failures.
  • Incorrect Installation: Improper installation, including incorrect tensioning, misalignment, or using incompatible components, can result in premature chain failure.
  • Fatigue and Wear: Continuous operation over time can lead to fatigue and wear in the chain, especially in high-speed or heavy-duty applications, resulting in eventual failure.

Regular maintenance, proper lubrication, adequate training for operators, and adherence to manufacturer guidelines can help mitigate these common causes of conveyor chain failures. Conducting routine inspections, promptly addressing issues, and replacing worn components can also significantly extend the life of the conveyor chain.

China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part  China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part
editor by CX 2023-10-21

China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 20Cr, 45# steel and so on.
2) Types: X348 X458 X678 XT160, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Assemly→Packing

Product Show
 

Technical Data
 

Model Forging Parameter (mm) Weight (Kg) Single-point Load (Kg) Allowable Load (Kg) Limit Load (Kg)
Type P H A B C D E F G K
X348-1 A 100 64 102 14 40 60 47.8 6 84 1.5 100 1100 1800
X348-2 B 100 64 102 14 40 60 47.8 6 82
X348-3 C 100 64 122 16 40 60 47.8 6 94
X458-1 A 126 79 138 18 54 82 54 9.5 113 1.8 200 1800 3600
X458-2 A 127 80 138 18 56 82 54 9.5 113
X458-3 A 130 83 138 18 54 82 54 9.5 113
X458-4 B 128.6 81 134.5 18 54 81 54 9.5 101.5
Extended Trolley A 150 103 138 18 54 82 54 9.5 113
X678-1 / 136 89 146 18 86 82 54 9.5 114 3.2 600 5000 7700
X678-2 / 134.5 87.5 142 18 86 82 54 9.5 106 2.8 550 4500 7200
XT160-1 / 171 103 180 26 84 120 70 15 140 9.7 750 4000 8000
XT160-2 / 170 102 174 26 86 120 70 15 148 8.8 700 3500 7500
X348-1 Reverse / 83 42 105 / 40 60 / 48 10 / 1.35 100 1100 1800
X348-2 Reverse / 86 45 93 / 40 60 / 48 10 / 1.35 100 6 1800
X458 Reverse / 95 44 120 / 54.5 60 / 54 10 / 2.5 200 1800 3600

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us

Shipping Cost:

Estimated freight per unit.



To be negotiated
Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Samples:
US$ 5/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

conveyor

How do you calculate the required horsepower for a conveyor chain drive?

The calculation of required horsepower for a conveyor chain drive involves considering various factors related to the conveyor system and the specific application. Here is a step-by-step process:

1. Determine the Total Resistance:

– Calculate the total resistance that the conveyor chain needs to overcome during operation. This includes the resistance due to the load being conveyed, frictional losses, elevation changes, and any other resistances in the system.

2. Convert the Resistance to Equivalent Inertia:

– Convert the total resistance to an equivalent inertia by multiplying it by the square of the chain speed.

3. Calculate the Total Inertia:

– Determine the total inertia of the system by considering the inertia of all the rotating components, such as the conveyor chain, sprockets, and any other driven elements.

4. Determine the Required Torque:

– Calculate the required torque by multiplying the total inertia by the desired acceleration or deceleration rate.

5. Convert Torque to Horsepower:

– Convert the required torque to horsepower by dividing it by the motor speed (in RPM) and multiplying by a conversion factor.

6. Consider Safety Factors and Efficiency:

– Apply safety factors to the calculated horsepower to account for variations, contingencies, and future growth.

– Consider the efficiency of the drive system, including the motor, gearbox, and other transmission components, to ensure accurate power transmission.

It’s important to note that the above calculation method provides an estimate of the required horsepower. Consulting with conveyor system manufacturers, engineers, or industry-specific guidelines is recommended for precise calculations and to ensure the selected conveyor chain drive meets the application requirements.

conveyor

How do you calculate the power requirements for a conveyor chain?

Calculating the power requirements for a conveyor chain involves considering various factors. Here’s a step-by-step process:

1. Determine the total weight to be transported: Measure or estimate the total weight of the material or product that will be carried by the conveyor chain. This includes the weight of the product itself, any packaging, and additional loads.

2. Determine the speed of the conveyor: Determine the desired speed at which the conveyor chain will operate. This is typically measured in feet per minute (FPM) or meters per second (m/s).

3. Calculate the required capacity: Multiply the total weight by the desired speed to determine the required capacity of the conveyor system. This will give you the weight per unit of time (e.g., pounds per minute or kilograms per hour).

4. Consider the conveyor’s design factors: Take into account various design factors such as the type and pitch of the conveyor chain, the coefficient of friction between the chain and the conveyor components, and any incline or decline angles of the conveyor system. These factors affect the power requirements.

5. Determine the required power: Use the following formula to calculate the power requirements:

Power (in horsepower) = (Capacity × Friction Factor) ÷ (33,000 × Efficiency)

Where:

– Capacity is the weight per unit of time (from step 3)

– Friction Factor is the ratio of chain tension to chain weight, taking into account the design factors

– 33,000 is a conversion factor to convert the units to horsepower

– Efficiency is the overall efficiency of the conveyor system, typically expressed as a decimal value (e.g., 0.95 for 95% efficiency)

6. Select a suitable motor: Based on the calculated power requirements, select a motor that can provide the necessary power to drive the conveyor chain. Consider factors such as motor type, motor efficiency, and overload capacity.

It’s important to note that the power requirements may vary depending on specific conveyor system designs and operating conditions. Consulting with a qualified engineer or conveyor manufacturer is recommended to ensure accurate calculations and proper motor selection.

conveyor

What are the advantages of using a conveyor chain in material handling?

Conveyor chains offer numerous advantages in material handling applications, making them a preferred choice in various industries. Here are some of the key advantages:

  • Efficient Transportation: Conveyor chains provide a continuous and reliable means of transporting materials, ensuring a smooth flow throughout the production or distribution process. They can handle both light and heavy loads, enabling efficient movement of items of different sizes and weights.
  • Increased Productivity: By automating the material handling process, conveyor chains help increase productivity and operational efficiency. They eliminate the need for manual handling and reduce human effort, allowing employees to focus on other tasks, resulting in higher throughput and reduced labor costs.
  • Flexibility and Customization: Conveyor chains can be designed and configured to meet specific material handling requirements. They are available in various lengths, widths, and configurations, allowing for customization based on the layout and space constraints of the facility. Additionally, different types of conveyor chains can be selected to handle specific materials or accommodate special handling needs.
  • Improved Safety: Conveyor chains enhance workplace safety by reducing the risk of manual lifting and carrying heavy loads. They provide a controlled and controlled movement of materials, minimizing the chances of accidents and injuries. Additionally, safety features such as emergency stop buttons, guardrails, and sensors can be incorporated into the conveyor system to further enhance safety.
  • Space Optimization: Conveyor chains utilize vertical and horizontal space efficiently, making them ideal for facilities with limited floor space. They can be designed to navigate corners, inclines, and declines, allowing for optimized layout and maximizing the use of available space.
  • Versatility: Conveyor chains are versatile and can handle a wide range of materials, including bulk items, packaged goods, fragile items, and irregularly shaped objects. They can accommodate different types of conveyance methods such as flat, inclined, or spiral conveyors, providing flexibility in material handling processes.
  • Improved Inventory Control: Conveyor chains enable better inventory control by facilitating the smooth movement and tracking of materials. They can be integrated with barcode scanners, RFID technology, or other tracking systems to monitor the flow of goods and provide real-time information on inventory levels.
  • Reduced Material Damage: Conveyor chains help minimize material damage during handling and transportation. They provide a stable and controlled movement, reducing the risk of items falling or getting damaged due to manual handling or rough transportation methods.

The advantages of using a conveyor chain in material handling include improved efficiency, productivity, safety, space utilization, and inventory control, leading to cost savings and enhanced overall operational performance.

China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part  China Best Sales Drop Forged Overhead Conveyor Bracket Trolley X458 Chain with Forged Machinery Part
editor by CX 2023-09-07

China factory Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: Standard types, X348 X458 X678, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Product Show
 

Technical Data
 

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
2571 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

conveyor

What are the considerations for selecting a corrosion-resistant conveyor chain?

When selecting a corrosion-resistant conveyor chain, several considerations should be taken into account to ensure optimal performance and longevity in corrosive environments. Here are the key factors to consider:

– Material Selection:

Choose a conveyor chain material that is resistant to the specific corrosive agents present in the environment. Stainless steel, plastic, and special coatings such as zinc or nickel plating are commonly used for their corrosion resistance properties.

– Corrosion Resistance Ratings:

Review the corrosion resistance ratings of different chain materials and coatings. Look for industry standards such as ASTM or ISO ratings that indicate the material’s resistance to specific corrosive substances or environmental conditions.

– Environmental Factors:

Consider the specific environmental factors that contribute to corrosion, such as humidity, temperature, presence of chemicals or solvents, and exposure to saltwater or acids. Evaluate how these factors may impact the chain’s corrosion resistance requirements.

– Coating or Surface Treatment:

If using a metal chain, consider applying additional coatings or surface treatments to enhance its corrosion resistance. Options may include electroplating, powder coating, or using specialized anti-corrosion coatings.

– Compatibility with Cleaning Methods:

Ensure that the selected chain material is compatible with the cleaning methods and chemicals used in the application. Some corrosive-resistant materials may require specific cleaning procedures to maintain their performance and longevity.

– Operational Considerations:

Take into account the load capacity, speed, and operational requirements of the conveyor system. Ensure that the corrosion-resistant chain can withstand the mechanical stresses and operational demands without compromising its corrosion resistance properties.

– Cost-Effectiveness:

Weigh the initial cost and long-term benefits of using a corrosion-resistant conveyor chain. While corrosion-resistant materials may have a higher upfront cost, they can significantly reduce maintenance, replacement, and downtime costs associated with corrosion-related failures.

By considering these factors, you can select a corrosion-resistant conveyor chain that is well-suited for the specific corrosive environment, ensuring reliable and durable performance in applications such as chemical processing, food production, wastewater treatment, or outdoor environments.

conveyor

How do you prevent corrosion in conveyor chains?

Preventing corrosion in conveyor chains is essential for maintaining their performance and prolonging their lifespan. Here are some effective measures to prevent corrosion:

1. Material Selection: Choose conveyor chains made from corrosion-resistant materials such as stainless steel, plastic, or coatings specifically designed to resist corrosion. These materials offer better protection against rust and corrosion compared to standard steel chains.

2. Proper Lubrication: Apply a suitable lubricant to the conveyor chain regularly. Lubrication creates a protective barrier that helps prevent moisture and contaminants from reaching the metal surface, reducing the risk of corrosion. Select a lubricant that provides corrosion protection properties and is compatible with the chain material.

3. Environmental Controls: Control the operating environment to minimize exposure to corrosive elements. Implement measures such as humidity control, proper ventilation, and protection from direct contact with water or chemicals. Consider using covers or enclosures to shield the conveyor chain from environmental factors that can accelerate corrosion.

4. Surface Treatments: Apply corrosion-resistant coatings or treatments to the conveyor chain. These coatings can provide an additional protective layer that acts as a barrier against moisture and corrosive substances. Examples of surface treatments include zinc plating, galvanizing, or epoxy coatings.

5. Regular Inspections and Cleaning: Regularly inspect the conveyor chain for signs of corrosion or damage. Remove any accumulated dirt, debris, or corrosive substances promptly. Cleaning the chain helps prevent the buildup of contaminants that can accelerate corrosion.

6. Preventive Maintenance: Implement a preventive maintenance program that includes regular cleaning, lubrication, and inspection of the conveyor chain. This proactive approach helps identify and address any potential corrosion issues early on, preventing further damage.

7. Proper Storage: When not in use, store the conveyor chains in a dry and controlled environment. Protect them from exposure to moisture, humidity, and corrosive substances. Use appropriate storage methods, such as hanging the chains or storing them in sealed containers.

By following these preventive measures, you can significantly reduce the risk of corrosion in conveyor chains, ensuring their optimal performance and longevity.

conveyor

Can a conveyor chain be repaired or does it need to be replaced entirely?

In general, conveyor chains can be repaired in certain cases, but there are instances where replacement is necessary. Here are some considerations:

  • Minor Damage: If the conveyor chain has minor damage, such as a broken link or a damaged pin, it may be possible to repair it by replacing the damaged components.
  • Significant Wear: If the chain has significant wear, such as elongation or excessive corrosion, it may be more cost-effective to replace the entire chain rather than attempting repairs.
  • Critical Components: Some conveyor chains have critical components that cannot be repaired, such as welded attachments or specialized features. In such cases, replacement is usually the only option.
  • Manufacturer’s Recommendations: It’s important to consult the manufacturer’s recommendations regarding chain repairability. They can provide specific guidelines on when repair is feasible and when replacement is necessary.

Before deciding whether to repair or replace a conveyor chain, it’s recommended to assess the extent of damage, consider the overall condition of the chain, and evaluate the cost-effectiveness of each option. It’s always advisable to consult with a qualified professional or the chain manufacturer to determine the best course of action.

China factory Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part  China factory Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part
editor by CX 2023-07-27

China Professional Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part double roller chain

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: Standard types, X348 X458 X678, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Product Show
 

Technical Data
 

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
2571 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Advantages and disadvantages of roller chains

If you need to lift heavy objects, you should know how to use a roller chain. Its simple design and simplicity make it ideal for a wide range of applications. This article will discuss the advantages and different types of applications of roller chains. After reading this article, you will be able to choose the type of roller chain that best suits your specific needs. In the next section, we’ll discuss how to deal with it.

Put on

How to measure the wear of a roller chain? There are several methods available, but the most accurate is to use a wear gauge kit. The CZPT Chain Wear Indicator Kit measures chain elongation. Compliant with ANSI and British Standards, this tool is critical to the industry chain and can help you determine when replacement is required. Improper chain maintenance can cause equipment to slip or perform poorly, resulting in unnecessary downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement represents the ANSI #80 standard for roller chains. Vernier calipers can also be used to measure the pitch of chains. This tool is very useful and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can determine if the roller chain needs to be replaced.
The wear resistance of a roller chain can extend its life by 10% or more. However, proper lubrication and general maintenance are essential to ensure the longest lifespan of your chain. The manufacturing process of a roller chain assembly also plays a crucial role in determining its service life. For longer life, you might consider purchasing a heavy-duty series roller chain with thicker side plates and longer pins. If you need greater working load capacity, you can also consider heavy-duty chains.
High-quality components are critical to the longevity of the roller chain. High-quality roller chain components require precise heat treatment processes. The use of proprietary steel allows the company to manufacture more durable drums. The pins are manufactured to tight tolerances and then undergo a centerless grinding process. This process removes any surface defects, resulting in a mirror finish on the pins. The uniformity of this surface finish also ensures that the load is evenly distributed on the pins, extending the life of the chain.

Material

Among the materials used in roller chains, carbon steel and alloy steel are the most common. However, stainless steel is used in food processing equipment and applications that require lubrication. Other materials used for roller chains include nylon and brass. For more information, see the USACE Material Specification Sheet for more information. You can also find information about the performance of a roller chain by its design. But before choosing one of these materials, consider its pros and cons.
Stainless steel is an excellent choice for roller chains. It is corrosion-resistant and can operate in extreme temperatures without cracking. Stainless steel is a non-magnetic material that can operate in a temperature range of -200 degrees to +700 degrees Fahrenheit. In addition to its corrosion-resistant properties, stainless steel can withstand a variety of environments and can be used in heavy-duty applications. The MEGA series is the strongest stainless steel roller chain in the world.

Application

As the name suggests, a roller chain has 5 basic components: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum performance and durability. Typical applications include drives and conveyor belts. The various components of the roller chain can be customized to specific needs. Read on to learn more about how these parts work together. This article presents the advantages and disadvantages of different types of roller chains and discusses their applications.
A roller chain is a form of chain drive consisting of short cylindrical rollers connected together by side links and gears called sprockets. While these devices are simple, they have some limitations. In most cases, sprockets must be designed with a maximum tensile load on one tooth to prevent premature chain failure. Therefore, these chains are less efficient than belt drives with higher inertia.
Roller chains are usually made of carbon or alloy steel, although stainless steel is often used where food processing machinery and lubrication are problematic. Sometimes, nylon and brass are used. The maximum running speed of the roller chain is important for some applications, but it also provides economic benefits for users and manufacturers. The maximum running speed of a roller chain is usually governed by a wear limit, which can vary by application.
The global roller chain market is expected to grow at a CAGR of over 5.4% over the next six years. The research report covers the competitive landscape and key factors influencing the market. The report also analyzes the growth potential, product utilization, and pricing models of key vendors. It also covers the SWOT analysis of the key players in the industry. The study provides a comprehensive market analysis of all these factors and more. It also highlights key players and their strategies and identifies the fastest growing regions for their products and services.

Maintain

Because rollers are exposed to a variety of environments, including snow, rain, and muddy roads, regular maintenance is required to prevent damage. Because they must encounter these elements frequently, frequent inspections are important to prevent rust and other damage. Also, avoid pouring acidic or alkaline cleaning products on the roller chain. Instead, use hot water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain directly with water has little effect.
For small rollers, the workload during the break-in period should not be too large, otherwise, it will cause overheating. The small drum should also be inspected frequently for any unusual appearance, which may indicate that the system is not functioning properly. In this case, the operation must be suspended. Failure to do so could result in serious injury or a facility fire. Additionally, a properly lubricated roller chain is essential to ensure long-term performance.
The surface of the roller is often rusted and scratched. Over time, these little scars can spread to the drive, damaging it. Also, the chain may not be properly spaced and timed. Therefore, it is very important to check regularly to ensure that the chain is in top condition. When the chain wears to 3% or more, the entire roller chain needs to be replaced. Failure to do so may damage the drive, the roller sprocket, or the entire chain.
Given the chain’s processing environment, lubrication is critical to its performance. If the chain is lubricated, it must be re-lubricated frequently. However, lubricated roller chains are susceptible to contamination, especially in the biomass industry. In these environments, airborne organic particles and debris from the biomass industry can contaminate lubricated roller chains. This is why maintenance is important for lubricating roller chains.
chain

Preloading

The benefits of preloading roller chains are well documented. In general, preloading eliminates the initial elongation of the roller chain, increasing its service life. Preloading is an effective way to achieve this, and a preloading chart can help illustrate the benefits of this process. Chains with little or no preload will stretch significantly during drive start, while chains will stretch rapidly as the surface hardness of the wear parts increases. Additionally, a properly preloaded chain has little or no elongation during the initial start-up of the drive, extending wear life.
Premium manufacturers apply the preload concept during their production phase, aligning all major components at the same time. This approach helps eliminate elongation issues that lead to rapid degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To avoid these problems, it is important to purchase a high-quality preloaded roller chain from a reputable source.
The heat treatment process is an effective way to prevent excessive wear of the roller chain. Heat treatment is a complex process that takes place in a factory during manufacturing. This process helps the rollers maintain high hardness and depth, preventing breakage. When buying a roller chain, make sure that the chain is heat treated and that the chain is manufactured to a high degree of precision. It also ensures that the product can be used for a long time.
In addition to performance benefits, preloading can also reduce initial elongation. A preloaded roller chain will exhibit near linear elongation, whereas a non-preloaded chain will experience rapid elongation. Therefore, they will reach the recommended 3% elongation earlier. Make sure the chain is properly lubricated. Also, consider how the chain is arranged. This is critical for optimal longevity.

China Professional Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part   double roller chainChina Professional Roller X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forging Part   double roller chain
editor by CX 2023-04-21

China Standard Chain Factory of Agricultural Rice Conveyor Roller Chain Transmission Chain and Industrial Conveyor Drive Chain with Attachment X348 X458 X678 conveyor roller chain

Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: Standard types, X348 X458 X678, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Product Show
 

Technical Data
 

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
2571 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Advantages and disadvantages of roller chains

If you need to lift heavy objects, you should know how to use a roller chain. Its simple design and simplicity make it ideal for a wide range of applications. This article will discuss the advantages and different types of applications of roller chains. After reading this article, you will be able to choose the type of roller chain that best suits your specific needs. In the next section, we’ll discuss how to deal with it.

Put on

How to measure the wear of a roller chain? There are several methods available, but the most accurate is to use a wear gauge kit. The CZPT Chain Wear Indicator Kit measures chain elongation. Compliant with ANSI and British Standards, this tool is critical to the industry chain and can help you determine when replacement is required. Improper chain maintenance can cause equipment to slip or perform poorly, resulting in unnecessary downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement represents the ANSI #80 standard for roller chains. Vernier calipers can also be used to measure the pitch of chains. This tool is very useful and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can determine if the roller chain needs to be replaced.
The wear resistance of a roller chain can extend its life by 10% or more. However, proper lubrication and general maintenance are essential to ensure the longest lifespan of your chain. The manufacturing process of a roller chain assembly also plays a crucial role in determining its service life. For longer life, you might consider purchasing a heavy-duty series roller chain with thicker side plates and longer pins. If you need greater working load capacity, you can also consider heavy-duty chains.
High-quality components are critical to the longevity of the roller chain. High-quality roller chain components require precise heat treatment processes. The use of proprietary steel allows the company to manufacture more durable drums. The pins are manufactured to tight tolerances and then undergo a centerless grinding process. This process removes any surface defects, resulting in a mirror finish on the pins. The uniformity of this surface finish also ensures that the load is evenly distributed on the pins, extending the life of the chain.

Material

Among the materials used in roller chains, carbon steel and alloy steel are the most common. However, stainless steel is used in food processing equipment and applications that require lubrication. Other materials used for roller chains include nylon and brass. For more information, see the USACE Material Specification Sheet for more information. You can also find information about the performance of a roller chain by its design. But before choosing one of these materials, consider its pros and cons.
Stainless steel is an excellent choice for roller chains. It is corrosion-resistant and can operate in extreme temperatures without cracking. Stainless steel is a non-magnetic material that can operate in a temperature range of -200 degrees to +700 degrees Fahrenheit. In addition to its corrosion-resistant properties, stainless steel can withstand a variety of environments and can be used in heavy-duty applications. The MEGA series is the strongest stainless steel roller chain in the world.

Application

As the name suggests, a roller chain has 5 basic components: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum performance and durability. Typical applications include drives and conveyor belts. The various components of the roller chain can be customized to specific needs. Read on to learn more about how these parts work together. This article presents the advantages and disadvantages of different types of roller chains and discusses their applications.
A roller chain is a form of chain drive consisting of short cylindrical rollers connected together by side links and gears called sprockets. While these devices are simple, they have some limitations. In most cases, sprockets must be designed with a maximum tensile load on one tooth to prevent premature chain failure. Therefore, these chains are less efficient than belt drives with higher inertia.
Roller chains are usually made of carbon or alloy steel, although stainless steel is often used where food processing machinery and lubrication are problematic. Sometimes, nylon and brass are used. The maximum running speed of the roller chain is important for some applications, but it also provides economic benefits for users and manufacturers. The maximum running speed of a roller chain is usually governed by a wear limit, which can vary by application.
The global roller chain market is expected to grow at a CAGR of over 5.4% over the next six years. The research report covers the competitive landscape and key factors influencing the market. The report also analyzes the growth potential, product utilization, and pricing models of key vendors. It also covers the SWOT analysis of the key players in the industry. The study provides a comprehensive market analysis of all these factors and more. It also highlights key players and their strategies and identifies the fastest growing regions for their products and services.

Maintain

Because rollers are exposed to a variety of environments, including snow, rain, and muddy roads, regular maintenance is required to prevent damage. Because they must encounter these elements frequently, frequent inspections are important to prevent rust and other damage. Also, avoid pouring acidic or alkaline cleaning products on the roller chain. Instead, use hot water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain directly with water has little effect.
For small rollers, the workload during the break-in period should not be too large, otherwise, it will cause overheating. The small drum should also be inspected frequently for any unusual appearance, which may indicate that the system is not functioning properly. In this case, the operation must be suspended. Failure to do so could result in serious injury or a facility fire. Additionally, a properly lubricated roller chain is essential to ensure long-term performance.
The surface of the roller is often rusted and scratched. Over time, these little scars can spread to the drive, damaging it. Also, the chain may not be properly spaced and timed. Therefore, it is very important to check regularly to ensure that the chain is in top condition. When the chain wears to 3% or more, the entire roller chain needs to be replaced. Failure to do so may damage the drive, the roller sprocket, or the entire chain.
Given the chain’s processing environment, lubrication is critical to its performance. If the chain is lubricated, it must be re-lubricated frequently. However, lubricated roller chains are susceptible to contamination, especially in the biomass industry. In these environments, airborne organic particles and debris from the biomass industry can contaminate lubricated roller chains. This is why maintenance is important for lubricating roller chains.
chain

Preloading

The benefits of preloading roller chains are well documented. In general, preloading eliminates the initial elongation of the roller chain, increasing its service life. Preloading is an effective way to achieve this, and a preloading chart can help illustrate the benefits of this process. Chains with little or no preload will stretch significantly during drive start, while chains will stretch rapidly as the surface hardness of the wear parts increases. Additionally, a properly preloaded chain has little or no elongation during the initial start-up of the drive, extending wear life.
Premium manufacturers apply the preload concept during their production phase, aligning all major components at the same time. This approach helps eliminate elongation issues that lead to rapid degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To avoid these problems, it is important to purchase a high-quality preloaded roller chain from a reputable source.
The heat treatment process is an effective way to prevent excessive wear of the roller chain. Heat treatment is a complex process that takes place in a factory during manufacturing. This process helps the rollers maintain high hardness and depth, preventing breakage. When buying a roller chain, make sure that the chain is heat treated and that the chain is manufactured to a high degree of precision. It also ensures that the product can be used for a long time.
In addition to performance benefits, preloading can also reduce initial elongation. A preloaded roller chain will exhibit near linear elongation, whereas a non-preloaded chain will experience rapid elongation. Therefore, they will reach the recommended 3% elongation earlier. Make sure the chain is properly lubricated. Also, consider how the chain is arranged. This is critical for optimal longevity.

China Standard Chain Factory of Agricultural Rice Conveyor Roller Chain Transmission Chain and Industrial Conveyor Drive Chain with Attachment X348 X458 X678   conveyor roller chainChina Standard Chain Factory of Agricultural Rice Conveyor Roller Chain Transmission Chain and Industrial Conveyor Drive Chain with Attachment X348 X458 X678   conveyor roller chain
editor by CX 2023-04-20

China Custom Manufacturer From China of Overhead Detachable Drop Forged Conveyor Chain for Powder CZPT Line (X348 X458 X658 X678 X698 F100 F160) with high quality

Merchandise Description

About Factory 

With far more than 18 years’ histiory, we are a professinal maker for drop solid products this sort of as solid chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Apart from, we can also make as for every your drawing or sample, unique hyperlink chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

one) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: X348 X458 X658 X678 X698 F100 F160, and so on. (Or as for every your drawing)
3) Approach: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Item Demonstrate
 

Technical Knowledge
 

Design Pitch Dimension Lateral Corner Common Measured Size (mm) Calculated Amount Tensile Strength (KN) Excess weight (Kg/m)
A F G J K S
80H eighty 73 42 18.4 20 34.5 19.five seven 3032/3058 38 250 seven.8
X348 seventy six.six forty six 27 twelve.seven twelve.7 20.six 13.five nine 3050.5/3095.2 forty 110 3.2
X458 102.four 57 37 16 sixteen 26.five seventeen.five nine 3063.1/3090.2 30 210 five.two
468H 102.four 84.one 47.8 eighteen 29.five 42.9 22.two 9 3063.1/3090.2 30 318 eleven.five
X658 153.2 55.6 35 sixteen sixteen 57.2 17.five 7 3055.1/3082.8 20 210 four
X678 153.two 77 50.eight 22.2 21 34.2 twenty five 7 3055.1/3082.8 20 320 nine.5
678 153.2 77 fifty.eight 22.2 21 34.two 25 7 3055.1/3082.8 20 320 9.5
698 153.two ninety five.twenty five sixty four 28 twenty five.four forty one.three 32 5 3055.1/3082.8 20 515 seventeen
998 229.4 95.twenty five 67.five 28 25.four 41.three 32 5 3205/3232.four thirteen 515 fourteen.eight
9118 229.4 123.eight 76.two 35 33.five fifty two 38.1 5 3205/3232.4 13 832 24.2
S348 76.6 38.9 28.six 12.seven twelve.7 20.6 thirteen.five 9 3050.5/3095.2 40 110 3.2
S458 102.4 fifty two.1 35 sixteen 16 26.5 17.five 9 3063.1/3090.two 30 210 5.2
S678 153.two 69.8 50.eight 22.2 21 34.two 25 seven 3055.1/3082.eight 20 320 9.5
S698 153.2 seventy three 68.three 28 25.4 41.3 32 5 3055.1/3082.8 20 515 seventeen
S9118 229.4 98.four 77.8 35 33.five 52 38.1 five 3205/3232.4 thirteen 832 24.two
F100 one hundred fifty seven 37 sixteen 16 26.five 17.five 9 2991.3/3018.3 thirty 210 five.2
F160 one hundred sixty 78 54 24 twenty.5 36 28 seven 3190.7/3219.five twenty 318 ten.3

Goods & Screening Equipments
 

Merchandise Application


Packing & Shipping
 

Why Pick Us?

1. We are engaged in chain market above 15 years with wealthy market place experience. We hold enhancing generation techniques. All the products have longer operating daily life and have handed the marketplace take a look at.

2. We can design the proper chains with large top quality content, great abrasion resistance, great corrosion, large improve and and so forth as per your request or the chain software.

3. We are the chain maker you can immediately obtain the solution from us with lower cost and higher top quality.

4. We have a skilled group for international trade, they have abundant encounters and are usually completely ready to solve difficulties for clients. So you have practically nothing to be concerned about.

5. We have the lengthy-phrase cooperative forwarder who can give us the most affordable freight. And it can aid you to preserve the freight. What is far more, for the FCL, we will layout the offers as for every the container sizes with the biggest ability to help save the shipping and delivery cost for both of us.

 

Advantages and Drawbacks of Drive Chains

Drive chains are extensively utilised for sliding metal guides. Even though answer chains are often employed, roller chains are a lot more efficient in size and bodyweight. Nevertheless, a drive chain is usually the greatest decision for filthy employment. The following are some of the benefits and negatives of travel chains. Find out far more! Adapt your vehicle to your certain predicament with push chains. You’ll be happy you did! Read through on to understand far more! Continue reading through for info on various types of drive chains.

Inverted tooth chain

An inverted tooth camshaft drive chain has tooth on its back links and two pin rolling pivot joints that interact every single other to transmit moderate to higher-speed rotations. This kind of push chain is also recognized as a silent chain push, which is notably effective in decreasing noise and vibration. The enamel on the links mesh completely with the teeth of the gear sprocket. The inverted tooth design and style also offers easy interaction of chain hyperlinks with the tooth of the sprocket.
The design of the new model was especially effective in quelling noise. The “Druid” spring forks enabled the chain to change with small motion of the axle. It was introduced at the 1910 Olympia present and sold far more than 500 units. The push chain was also silent, which lowered the want for sound insulation and attenuation components, which in flip minimized bodyweight. That’s why, it became an best selection for wind turbines.
The main down sides of chain travel incorporate its minimal speed and constrained assortment. It is high-priced to manufacture and calls for precise mounting. Routine maintenance is important, like lubrication and slack adjustment. Its velocity fluctuates as the chain is stretched. This causes the chain to fail at the worst feasible time. The chain push also has problems associated with slippage. In addition, it can be inclined to extreme use and tear. Fortunately, nevertheless, there are newer sorts of generate chains available, which are a lot more tough and dependable.

Duplex chain

There are 3 kinds of duplex drive chains: SC, RP, and Ramsey. Each and every has their possess unique rewards and functions. The Rampower duplex collection provides twice the electricity capability of the standard SC duplex chain. They are often used in new programs. SC duplex chains are the most reasonably priced and are employed in significantly less demanding purposes. The SC duplex chain has a reduce electrical power capacity but decrease weight. There is also no guarantee of functionality.

Multi-strand roller chain

The A number of-strand roller chain for push chain market can be outlined on the foundation of the variables that generate development in this business. The factors that hamper marketplace growth can be understood in buy to come up with alternative bends for lucrative options. This report aims to realize the present situation and the affect of COVID-19 on the market as a total. We will also discuss the market place drivers and restraints. We will talk about the different varieties of Several-strand roller chains for push chain and their industry sizes in the coming many years.
The bare minimum tensile strength for a roller chain is a single sixth or a single-ninth the tensile toughness of a standard travel chain. These specifications are established to stop linkplate fatigue, which is the major lead to of premature breakdown. A chain created of this material is deemed a exceptional option for higher-performance programs involving a high load-bearing ability. If you’re utilizing a push chain, make positive to select a proper chain based mostly on the sort of software. A basic chain with a large load-bearing capability is also ideal for basic purposes.
Although it is correct that a large-pressure, large-velocity drive calls for a larger energy ranking than a minimal-speed chain, roller chains are mostly utilised in minimal to mid-pace programs. They are comparable to bicycle chains but may have a grasp url. In motorcycles, chains are heavier and may demand a chain device to remove. These chains are often changed with toothed belts or a mixture of equally.

Flat best chain

The flat leading push chain is a functional conveyor belt that conveys medium and massive workpiece pallets. Its arcing capacity helps make it suitable for ongoing generate mixtures involving curve arcs. The flat top chain is also accessible with PA put on pads on the workpiece pallets. The flat best chain’s metal and plastic glide profiles permit surface hundreds of up to 1.5 kg/cm. Hd profiles are suitable with the flat best chain.
The metal flat leading chain is available in many sorts: 815, 820, and 881 series. These are warmth-handled to have higher strength and exceptional use resistance. They can also be used with different sprockets, including 820 sprockets. The higher-high quality steel chain can be used with a lot of industrial programs. However, if you are hunting for a tough chain for your industrial application, iwis hardened stainless metal flat prime chains are an outstanding selection.
TSplus flat best generate chain delivers the most flexibility of any conveying media. The drive units can be joined conclude-to-stop to sort prolonged conveyor lines. Side-flexing flat top chains are available to develop serpentine, in-line, and carousel conveyors. Push units are obtainable in normal and hefty-duty designs. They are versatile adequate to take care of a selection of container sizes. If you need to have a a lot more complex conveyor system, you can select a large-obligation push chain.
Rexnord flat best chains come in two simple styles: MatTop chain and TableTop chain. The TableTop chain is molded in normal widths ranging from 3.25 inches to 12 inches. These are delivered in 10-foot sections, but you can also find 20-foot-extensive mattop chains. You can even customize your MatTop chain to meet your precise requirements. They are perfect for a assortment of conveying apps, from common conveying to wash down apps.

Conveyor chain

Push chains for conveyors arrive in a assortment of designs. These chains can have different levels of pitch. Pitch is governed by wheel tooth toughness, the overall chain rigidity, and the kind of travel motor. A regular optimum pitch is identified by the width of the url plates and the angle in between the mounting angles. You can improve the pitch of your chain by strengthening the bushes between the website link plates. Make confident that the hole between the wheel teeth and the bushes is approximately 1-fourth inch.
Pitch and tension of the chain are crucial concerns when choosing a chain. The minimum pitch is identified by the thickness of the tooth on the wheel and the highest pitch is established by the rigidity of the link plates. However, this highest pitch might be exceeded with bushes among the website link plates or clearance with the wheel enamel. A excellent high quality chain will have bearing surfaces lubricated to stop extreme put on and rust. Medium-viscosity mineral oil is appropriate for normal operating circumstances. SAE 20W-fifty is a very good option for this application. Self-lubricating chains are accessible from many chain companies.
The chain is generally lubricated by dripping oil among the back links. This variety of lubrication requires regular inspection of the conveyor chain. The sum of oil ought to be ample to avert reddish brown discoloration on the chain joints. A lubricating oil ought to be utilized on a everyday foundation, according to the manufacturer’s technical specs. In order to make sure a longer life for your travel chain, make certain that you lubricate it on a regular foundation.

China Custom Manufacturer From China of Overhead Detachable Drop Forged Conveyor Chain for Powder CZPT Line (X348 X458 X658 X678 X698 F100 F160)     with high quality

China manufacturer X458 I-Beam Trolley Dropped Forged Conveyor Chain with Great quality

Product Description

About Factory 

With far more than 18 years’ histiory, we are a professinal manufacturer for fall solid items these kinds of as solid chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and travel chain (X348, X458, X678), and so forth normal moulds of chain. 

Besides, we can also produce as for every your drawing or sample, unique link chain, pusher, pin and plate, according to customers’ exclusive demands.

Solution Description

one) Content: Alloy steel, 20Cr, forty five# steel and so on.
two) Sorts: X348 X458 X678 XT160, and so on. (Or as for each your drawing)
three) Approach: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Assemly→Packing

Product Show
 

Specialized Knowledge
 

Product Forging Parameter (mm) Excess weight (Kg) One-position Load (Kg) Allowable Load (Kg) Restrict Load (Kg)
Variety P H A B C D E F G K
X348-1 A one hundred sixty four 102 14 40 sixty 47.8 six 84 1.five 100 1100 1800
X348-2 B 100 64 102 14 forty 60 forty seven.8 6 eighty two
X348-three C 100 64 122 sixteen 40 sixty 47.eight six 94
X458-1 A 126 79 138 eighteen 54 eighty two 54 nine.5 113 1.8 200 1800 3600
X458-two A 127 eighty 138 eighteen 56 eighty two 54 9.5 113
X458-3 A one hundred thirty eighty three 138 18 54 82 54 nine.5 113
X458-four B 128.six eighty one 134.5 18 54 81 fifty four 9.5 one zero one.five
Extended Trolley A one hundred fifty 103 138 eighteen fifty four 82 54 9.five 113
X678-one / 136 89 146 18 86 eighty two fifty four nine.5 114 three.2 600 5000 7700
X678-two / 134.5 87.five 142 18 86 eighty two fifty four 9.five 106 2.8 550 4500 7200
XT160-one / 171 103 a hundred and eighty 26 84 one hundred twenty 70 15 one hundred forty nine.seven 750 4000 8000
XT160-two / one hundred seventy 102 174 26 86 120 70 fifteen 148 eight.8 700 3500 7500
X348-1 Reverse / 83 42 one zero five / forty 60 / 48 10 / 1.35 one hundred 1100 1800
X348-2 Reverse / 86 forty five 93 / 40 sixty / 48 10 / 1.35 a hundred six 1800
X458 Reverse / 95 forty four a hundred and twenty / fifty four.5 60 / fifty four ten / two.five 200 1800 3600

Merchandise & Testing Equipments
 

Items Application


Packing & Delivery
 

Why Select Us?

1. We are engaged in chain market above 15 many years with abundant market place experience. We maintain bettering generation methods. All the products have lengthier operating life and have passed the market test.

2. We can layout the right chains with high good quality substance, good abrasion resistance, very good corrosion, large reinforce and and so on as per your ask for or the chain application.

3. We are the chain producer you can directly purchase the item from us with minimal price and high top quality.

4. We have a expert group for worldwide trade, they have considerable experiences and are often ready to solve troubles for customers. So you have absolutely nothing to be concerned about.

5. We have the lengthy-time period cooperative forwarder who can give us the most affordable freight. And it can aid you to help save the freight. What is actually much more, for the FCL, we will style the packages as for every the container measurements with the premier ability to save the delivery price for both of us

Advantages and drawbacks of roller chains

If you need to carry hefty objects, you must know how to use a roller chain. Its simple design and simplicity make it perfect for a extensive range of purposes. This post will examine the rewards and different sorts of programs of roller chains. Right after reading this post, you will be able to pick the variety of roller chain that best satisfies your certain requirements. In the up coming area, we are going to go over how to offer with it.

Set on

How to measure the dress in of a roller chain? There are many techniques available, but the most precise is to use a dress in gauge package. The CZPT Chain Wear Indicator Package measures chain elongation. Compliant with ANSI and British Requirements, this instrument is vital to the business chain and can help you figure out when substitution is required. Improper chain upkeep can result in gear to slip or carry out improperly, ensuing in needless downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement signifies the ANSI #80 regular for roller chains. Vernier calipers can also be employed to measure the pitch of chains. This instrument is quite valuable and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can figure out if the roller chain requirements to be replaced.
The wear resistance of a roller chain can lengthen its lifestyle by 10% or much more. Nevertheless, proper lubrication and common upkeep are essential to make sure the longest lifespan of your chain. The producing method of a roller chain assembly also performs a vital function in identifying its services daily life. For longer existence, you may possibly think about acquiring a weighty-duty collection roller chain with thicker side plates and longer pins. If you need to have greater doing work load capability, you can also think about hefty-responsibility chains.
Large-top quality factors are crucial to the longevity of the roller chain. Higher-good quality roller chain parts require specific heat treatment method procedures. The use of proprietary steel enables the business to manufacture much more durable drums. The pins are manufactured to restricted tolerances and then endure a centerless grinding process. This process eliminates any area defects, resulting in a mirror complete on the pins. The uniformity of this area finish also ensures that the load is evenly dispersed on the pins, extending the lifestyle of the chain.

Materials

Amid the materials used in roller chains, carbon steel and alloy metal are the most typical. However, stainless metal is utilized in foods processing gear and purposes that require lubrication. Other resources employed for roller chains consist of nylon and brass. For a lot more information, see the USACE Content Specification Sheet for a lot more details. You can also uncover details about the functionality of a roller chain by its design and style. But prior to selecting one particular of these resources, contemplate its pros and downsides.
Stainless steel is an exceptional decision for roller chains. It is corrosion-resistant and can run in intense temperatures without having cracking. Stainless metal is a non-magnetic content that can work in a temperature selection of -200 degrees to +seven hundred levels Fahrenheit. In addition to its corrosion-resistant homes, stainless steel can stand up to a selection of environments and can be employed in hefty-responsibility programs. The MEGA sequence is the strongest stainless metal roller chain in the planet.

Application

As the identify implies, a roller chain has 5 fundamental parts: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum functionality and durability. Standard programs incorporate drives and conveyor belts. The numerous components of the roller chain can be personalized to particular requirements. Study on to find out a lot more about how these areas work with each other. This post provides the advantages and disadvantages of diverse varieties of roller chains and discusses their apps.
A roller chain is a form of chain travel consisting of short cylindrical rollers linked with each other by facet backlinks and gears known as sprockets. Although these units are simple, they have some restrictions. In most cases, sprockets must be created with a greatest tensile load on 1 tooth to stop untimely chain failure. For that reason, these chains are significantly less effective than belt drives with greater inertia.
Roller chains are normally made of carbon or alloy metal, though stainless metal is usually utilized in which foods processing equipment and lubrication are problematic. Sometimes, nylon and brass are utilized. The highest working velocity of the roller chain is important for some programs, but it also gives economic positive aspects for end users and manufacturers. The greatest running speed of a roller chain is typically governed by a put on restrict, which can range by application.
The worldwide roller chain market is expected to develop at a CAGR of in excess of 5.4% more than the subsequent six years. The investigation report addresses the aggressive landscape and essential variables influencing the industry. The report also analyzes the growth likely, merchandise utilization, and pricing versions of key suppliers. It also covers the SWOT examination of the key gamers in the sector. The study supplies a thorough marketplace analysis of all these elements and much more. It also highlights crucial players and their strategies and identifies the quickest expanding regions for their items and solutions.

Keep

Simply because rollers are exposed to a range of environments, such as snow, rain, and muddy streets, typical maintenance is necessary to stop damage. Since they need to experience these components usually, repeated inspections are essential to stop rust and other hurt. Also, avoid pouring acidic or alkaline cleansing goods on the roller chain. Alternatively, use scorching water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain straight with water has minor result.
For little rollers, the workload throughout the split-in time period ought to not be also big, or else, it will cause overheating. The tiny drum should also be inspected frequently for any abnormal appearance, which may possibly show that the technique is not functioning appropriately. In this circumstance, the procedure have to be suspended. Failure to do so could end result in significant damage or a facility fireplace. Additionally, a correctly lubricated roller chain is important to make certain lengthy-term overall performance.
The area of the roller is often rusted and scratched. In excess of time, these small scars can spread to the generate, harmful it. Also, the chain could not be appropriately spaced and timed. As a result, it is really essential to check out frequently to make certain that the chain is in leading situation. When the chain wears to 3% or much more, the complete roller chain requirements to be changed. Failure to do so may possibly hurt the push, the roller sprocket, or the entire chain.
Offered the chain’s processing surroundings, lubrication is essential to its overall performance. If the chain is lubricated, it have to be re-lubricated usually. Even so, lubricated roller chains are vulnerable to contamination, particularly in the biomass business. In these environments, airborne organic and natural particles and debris from the biomass market can contaminate lubricated roller chains. This is why maintenance is essential for lubricating roller chains.

Preloading

The benefits of preloading roller chains are properly documented. In common, preloading removes the initial elongation of the roller chain, escalating its service daily life. Preloading is an successful way to obtain this, and a preloading chart can help illustrate the benefits of this procedure. Chains with little or no preload will extend significantly in the course of push commence, although chains will stretch rapidly as the surface hardness of the put on areas increases. Additionally, a effectively preloaded chain has minor or no elongation throughout the original start off-up of the push, extending wear existence.
Quality makers utilize the preload idea during their generation section, aligning all significant factors at the very same time. This technique will help remove elongation concerns that guide to fast degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To stay away from these difficulties, it is important to buy a higher-quality preloaded roller chain from a respected source.
The warmth treatment method process is an efficient way to prevent abnormal dress in of the roller chain. Heat treatment method is a complex procedure that will take location in a factory during production. This approach assists the rollers keep substantial hardness and depth, preventing breakage. When getting a roller chain, make sure that the chain is heat taken care of and that the chain is created to a large diploma of precision. It also ensures that the item can be employed for a long time.
In addition to functionality benefits, preloading can also minimize first elongation. A preloaded roller chain will show near linear elongation, whereas a non-preloaded chain will expertise speedy elongation. Consequently, they will achieve the advised 3% elongation previously. Make positive the chain is effectively lubricated. Also, take into account how the chain is organized. This is crucial for optimum longevity.

China manufacturer X458 I-Beam Trolley Dropped Forged Conveyor Chain     with Great quality